ZINGA Various Application Methods

Airless Spray Was Used To Apply ZINGA galvanising on 200 + Steel Supports For Dublin City Centre Complex

ZINGA can be applied using a normal paintbrush (natural hairs) or a short-fibre roller for smaller applications or to perform a stripe-coat.

In order to fill the profile of the substrate better, it is advised to dilute ZINGA 3-5% (mass on mass – see below dilution table).

This will give a smoother finish.

It is always recommended to treat corners, sharp edges, bolts and nuts with a stripe coat (by brush) before applying a uniform coat by spray.

For more technical data, see ZINGA Technical Data Sheet.

ZINGA Application by Conventional Spray

ZINGA can be applied using a conventional spray gun. In order to ensure good circulation of the ZINGA, it should be diluted 10 to 20% (mass on mass – see below dilution table) depending on pressure at the nozzle and nozzle opening.

More dilution for the same nozzle will give a smoother surface finish (less porous).

For more technical data, see ZINGA Technical Data Sheet.

ZINGA Application by Airless Spray

ZINGA can be applied using an airless spray gun. A 19 thou tip is best for general application, narrow or wide fan as the job requires.

In order to ensure good circulation of the ZINGA, it should be diluted 5 to 7% (mass on mass – see below dilution table) depending on pressure at the nozzle and nozzle opening. More dilution for the same nozzle will give a smoother surface finish (less porous).

For more technical data, see ZINGA Technical Data Sheet.

 

Dilution Table

 

Brush or roller

3-5%

Conventional spray

10-20%

Airless spray

5-7%

1 kg

0.03-0.05 kg / 0.034-0.057 L

Zingasolv

0.10-0.20 kg / 0.114-0.228 L

Zingasolv

0.05-0.07 kg / 0.057-0.080 L

Zingasolv

2 kg

0.06-0.10 kg / 0.068-0.114 L

Zingasolv

0.20-0.40 kg / 0.228-0.457 L

Zingasolv

0.10-0.14 kg / 0.114-0.160 L

Zingasolv

5 kg

0.15-0.25 kg / 0.171-0.285 L

Zingasolv

0.50-1.00 kg / 0.571-1.142 L

Zingasolv

0.25-0.35 kg / 0.285-0.400 L

Zingasolv

10 kg

0.30-0.50 kg / 0.342-0.571 L

Zingasolv

1.00-2.00 kg / 1.142-2.283 L

Zingasolv

0.50-0.70 kg / 0.571-0.800 L

Zingasolv

25 kg

0.75-1.25 kg / 0.856-1.427 L

Zingasolv

2.50-5.00 kg / 2.854-5.708 L

Zingasolv

1.25-1.75 kg / 1.427-1.998 L

Zingasolv

SURFACE PREPARATION

ZINGA ON (OLD) HOT DIP



x

Enquiry Form

* :
* :
:
:
* :
* denotes required fields