Alu ZM Aluminium Finish For Zinga

If you want a silvery finish over a Zinganised surface, ALU ZM is the perfect choice.

TDS Alu ZM

Alu ZM from ZINGA is a quick drying one pack coating containing aluminium flakes. It can be applied directly onto old, oncorroded hot-dip galvanised or thermal sprayed zinc substrates or as an aluminium topcoat over ZINGA.

It can be applied by brushing or spraying in a wide range of atmospheric circumstances. Alu ZM is mainly applied for aesthetical reasons as it gives a shiny aluminium aspect, but it also has good chemical and abrasion resistance which allows it to be used in industrial environments.

 

    
TDS Alu ZM EN   DOWNLOAD  
   


References & Certification and tests

Project Description
The Burdekin Bridge (known as the Silver Link) spans the Burdekin River between the towns of Ayr and Home Hill, Queensland, Australia. Located on the Bruce Highway which is part of Highway 1, it is an important link in the national road network.
It is a road-rail bridge which provides high flood immunity link between north and south Queensland. The Bridge was completed in 1957. Construction began 10 years earlier in 1947. 1103 meters in length, it is one of the longest multi-span bridges in Australia.

ZINGA has been used since 2005 for patch repair. During 2010/2011 the under road areas of the 22 approach spans have been coated with ZINGA.

In the beginning of 2013, the road support structures were coated with ZINGA specified as a class Sa2½ abrasive blast clean followed by 2 coats of ZINGA to an average dry film thickness of 180 μm. The coating system for the rail support structure required a decorative silver finish, and the coating system was therefore as described but incorporated a coat of AluZm. A dry film thickness of 40 μm was specified.

 



Click to download Technical Data Click to download MSDS Sheet
CONTACT US
x

Enquiry Form

* :
* :
:
:
* :
* denotes required fields